How To Fix A Warped Ping Pong Table Top Easily (Simple Steps)

What happens if the ping pong tabletop is damaged during the play?

Will you stop the game and bring it to the store to fix it or call the customer service system and ask for the repair or buy a new table?

As you know, among the tools and equipment you need to play table tennis, the table is the most expensive one. It’s not a cheap one for you to replace with a new one easily. To fix it is a more economical way, however, some damages you can solve by yourselves such as small holes on the surface or warped top.

Warped tabletop happens simply due to long-time usage, moisture, or mold. Sometimes it occurs when there are impacts or bumps.

Hereafter, we will give you a guide on How to fix a warped ping pong table.

Save these steps to have the best shot of making your table playable for the next time…

4 Steps For How To Fix A Warped Ping Pong Table

  • Step 1: Remove the top out of the legs
  • #Step 2: Verify the Damage
  • Step 3: Dampen, if necessary
  • #Step 4: Weigh down the Warp

Read more:

How to fix a ping pong paddle? Simply and Quickly

How To Fix A Dented Table Tennis Ball? – Solving Table Tennis Problems

A Quick Tip: No matter how careful you are in taking good care of your table tennis table, accidents are bound to occur and the table could be prone to warping. If the warping isn’t too serious, it’s likely you’ll be able to repair the damage and continue playing again.

This is the reason you have to ensure that you take action immediately to stop any warping by taking action you can stop the problem from becoming more terrible. If you’ve got a damaged ping pong table top, you should adhere to these guidelines to fix the damage and have a flat playing surface again.

how to fix a warped ping pong table

Step 1: Remove the Top out of the legs

It’s difficult to fix the warped ping pong table top if it remains attached to the legs. Therefore, first of all, you need to remove the top out of the leg using the right tools to do it. After removing the screw carefully or any other hardware that is holding the top with frame and legs, you can put it on the ground, so that you are able to work on it.

Keep the track of every piece of hardware you take off while removing the tabletop. You should ensure that you put it back in the correct place and in the right arrangement to ensure that your table remains in good shape.

You also need some space to put the tabletop upside down.

Step 2: Examine the damage

After you remove the top out of the legs, you’ll be able to check the damage that you’ve suffered. With light warping it can easily be fixed by yourself, meanwhile, if the table was in humid conditions or allowed to gradually warp over a longer time, then repairs will not be easy.

Be sure to take a look at all sides of the tabletop, including the bottom, the corners, on the top, and around the sides to determine the location of the damage. This will help you plan for your next step. Only by understanding the extent of the table’s warping issues that you’ll be able to take care of your table, and fix the damage.

Step 3. Dampen If Needed

The next step is to examine the wood of your table to determine if the table is still damp from warping or if it’s completely dried. Warping that is old will usually dry, however, If you take action quickly, you might be able to stop warping in the event that the table’s surface remains damp.

If your table has stopped being damp, you’ll have an extremely difficult time fixing the warping. Start by lightly misting water on the table area where it has warped, allow it to sit on the table, and allow it to soak into. Be careful not to apply too much water that it’s standing on the table.

If the table is still wet, then you do not need to add any water. You can simply continue on to the next step.

Step 4: Weigh the Warp

You will need a large plastic sheet, you will want to put the tabletop playing-side down on this sheet. It will be helpful for weighing down the warps. Be sure that the plastic sheet is similar or larger than the size of the tabletop.

In order to keep the table level to the surface, now you have to place something heavy over the surface of your table and be sure that you concentrate on the warped region. Warps with larger sizes may have to be treated several times in order to have a smooth tabletop.

Let the table dry completely, while it is weighted then take the weight off and inspect the condition of the table. The table can be reassembled table, however, base on how serious the damage is, you need to think about replacing the new tabletop.

If your ping-pong table isn’t terribly bent, you’ll probably be able to repair it by yourself, provided that you take action promptly. However, if the damage is serious or has occurred over a period of time, it is likely that you will need to replace the tabletop. Although it may be more expensive, it is far less difficult than trying to repair the surface that is warped.

Further Reading:

How to Repair a Ping-Pong Table Surface

In Conclusion

We hope that this guide can help you to handle it by yourself in How to fix a warped ping pong table. However, preventing better than fixing, you should store your table tennis table in a dry place, don’t hit it too hard, and avoid the heavy objects on it.

If you buy qualified and good fame of the top ping pong tables, it also gives you avoid many errors or damage during playing. You can have a look at the best ping pong tables via some other post on this website to become a professional player in this sport.